Cement haze, plaster and render residue often occur when windows and doors are installed in a new-build home. They can leave stubborn whitish stains on PVC or aluminium window and door frames. These stains are particularly visible on dark-coloured profiles.

Anaf Cement Cleaner 100 is ideally suited for removing limescale and cement haze, plaster residue and excess render from window and door profiles. The product is safe to use and does not damage the frames.

Before use, shake Anaf Cement Cleaner 100 well. Then apply the product to the soiled frames using a soft cloth. Allow the product to work for a short while so that the dirt can dissolve. Afterwards, rinse the surface thoroughly with water. If the dirt has not been completely removed, repeat the process.

The product must never be used on acid-sensitive tiles, such as bluestone.

• Suitable for PVC and aluminium windows and doors
• Safe to use
• Removes cement haze, render residue and plaster residue from window and door frames
• Easy to use

Het bericht Verwijder cementsluier en pleister van ramen en deuren verscheen eerst op ANAF Compounding Solutions.

It is therefore important to thoroughly maintain aluminium twice a year. For this purpose, Anaf has developed a professional maintenance kit.

To restore the appearance of aluminium joinery, the treatment is carried out in 2 steps.

STEP 1: Use the Anaf AluClean neutral cleaner to remove dirt. The product can be diluted with water up to a maximum ratio of 1:20 (depending on the level of soiling). Apply AluClean to the surface using a clean sponge and rub it in thoroughly. Once the entire surface has been cleaned, rinse it with clean water. The surface can then be dried using a clean, soft cloth.

STEP 2: Use the Anaf AluReno Surface Renewer to restore the original colour. AluReno can now be applied undiluted to a clean sponge and spread evenly over the surface. The product is very economical to use. Make sure to apply it evenly to prevent streaking

Anaf has developed a professional maintenance kit suitable for all types of aluminium. The complete kit can be personalised.

The Anaf Professional Aluminium Maintenance Kit contains:

• 1X 500Ml. AluClean (shampoo)
• 1X 500Ml. AluReno surface renewer
• 1x High-quality microfibre cloth without edging
• 1x Professional sponge

Het bericht Herstel je verweerde poort of schrijnwerk verscheen eerst op ANAF Compounding Solutions.

Het bericht PVC terug wit maken verscheen eerst op ANAF Compounding Solutions.

Glass can sometimes become heavily weathered or affected by stubborn dirt and deposits. Typical examples include limescale, sticker residue, cement and concrete residue, rainwater stains, silicone residue, uncured PU foam, etc.

With Antiris Eco 300, it is possible to restore the glass to its original condition.

First, it is recommended to remove any sand and dust from the glass, as these particles may cause scratches on the surface. Shake the bottle of Antiris Eco 300 thoroughly before use. Then apply the product to a damp cloth or sponge. The surface can now be cleaned using circular motions. It is also possible to use a machine-operated cleaning pad. When the cloth becomes dirty, make sure to switch to a clean section of the cloth.

For particularly stubborn dirt or deposits, it may be necessary to repeat the cleaning process. After cleaning, rinse and wipe the glass with water.

Antiris does not contain any corrosive substances, but it must not be used on Plexiglas® / PMMA. For these surfaces, Anaf has developed a special PMMA cleaner.

Het bericht Haal hardnekkig vuil van je glas verscheen eerst op ANAF Compounding Solutions.

PVC Cleaner 120 is the most powerful cleaner for white PVC and has an antistatic effect. It can also be used to make light scratches on the surface of the profile virtually invisible. This PVC Cleaner 120 Antistatic is a specialised cleaning product for white rigid PVC building materials, such as window frames, windows, doors, roller shutters and shelves.

• This product also makes it possible to render small scratches on the profile surface virtually invisible
• The product has an antistatic effect
• Treated surfaces stay clean for longer
• Fast-acting

Het bericht PVC Cleaner 120 – witte PVC reiniger verscheen eerst op ANAF Compounding Solutions.

PVC Cleaner 20 does not damage the film and can be used for a variety of applications:

• Removal of adhesive residues, fresh uncured PU foam, sticker residues, marker pen marks, rubber residues, adhesive tape, resins, etc. (e.g. after installing windows and doors)
• Preparation and degreasing of surfaces to be bonded

PVC Cleaner 20 can be used on all types of PVC (including coloured PVC with film) and other plastics (e.g. laminate, PMMA, etc.).

Het bericht PVC Cleaner 20 – gekleurde PVC reiniger verscheen eerst op ANAF Compounding Solutions.

Restore your weathered aluminium gate or window

Het bericht cache verscheen eerst op ANAF Compounding Solutions.